330101-00-08-05-02-00 | Bently Nevada 8 mm Probe Supplier

Introduction to the 330101-00-08-05-02-00

When machinery vibration threatens uptime, the 330101-00-08-05-02-00 provides precise measurement. This Bently Nevada 3300 XL 8 mm probe uses a 3/8-24 UNF thread and comes without armor. It is made in the U.S.A. and built for industrial environments.

Key Features and Technical Specs of the 330101-00-08-05-02-00

• Unthreaded Length Option: 00 – 0.0 in.
• Overall Case Length Option: 08 – 0.8 in.
• Total Length Option: 05 – 0.5 meter (1.6 feet).
• Connector and Cable-Type Option: 02 – Miniature coaxial ClickLoc connector, standard cable.
• Nominal Probe DC Resistance: 7.45 ± 0.50 Ω for 0.5 m probe length.
• Linear Range: 2 mm (80 mils), from approximately 0.25 mm (10 mils) to 2.3 mm (90 mils) from target.
• Incremental Scale Factor (ISF): 7.87 V/mm (200 mV/mil) ± 5% for standard 5 or 1 meter system.
• Probe Tip Material: Polyphenylene sulfide (PPS).
• Probe Case Material: AISI 303 or 304 stainless steel.
• Probe Temperature Range (Standard): -52°C to +177°C (-62°F to +350°F).

One distinctive spec is the patented TipLoc molding method. It creates a stronger bond between the probe tip and body. This reduces mechanical failure risk in high-vibration applications.

Applications and Use Cases for the 330101-00-08-05-02-00

Engineers use this probe for radial vibration monitoring in rotating machinery. It excels in turbines, compressors, and pumps. The 2 mm linear range covers most shaft vibration needs. Because the probe has a robust PPS tip, it withstands harsh conditions. In addition, the stainless steel case resists corrosion.

Installation and Setup Guidance

Mount the probe with a 3/8-24 UNF thread. Use the recommended gap setting of -9 Vdc, which corresponds to approximately 1.27 mm (50 mils). For field wiring, use 0.2 to 1.5 mm² (16 to 24 AWG) three-conductor shielded triad cable. The maximum length between the Proximitor Sensor and monitor is 305 meters (1,000 feet). Ensure the probe tip is clean before installation.

Maintenance and Reliability Tips

Inspect the probe periodically for physical damage. The CableLoc design provides 330 N (75 lbf) pull strength to secure the cable. Check the O-ring seal if the probe is exposed to differential pressure. For extended temperature ranges, the probe tip can operate up to +218°C. Regular verification of the scale factor helps maintain accuracy.

Compatibility and Integration

The 330101-00-08-05-02-00 works with Bently Nevada 3300 XL extension cables and Proximitor sensors. It uses a miniature coaxial ClickLoc connector for reliable signal transmission. The system supports standard cable lengths of 5 or 9 meters. For longer runs, field wiring up to 305 meters is possible.

FAQs about the 330101-00-08-05-02-00

Q: What is the linear range of the 330101-00-08-05-02-00?

A: The linear range is 2 mm (80 mils), starting at approximately 0.25 mm (10 mils) from the target.

Q: What is the recommended gap setting for radial vibration?

A: The recommended gap setting is -9 Vdc, approximately 1.27 mm (50 mils).

Q: What is the probe tip material?

A: The probe tip is made of polyphenylene sulfide (PPS).

Q: What is the maximum field wiring length?

A: The maximum length between the Proximitor Sensor and monitor is 305 meters (1,000 feet).

Q: What is the operating temperature range for the standard probe?

A: The standard probe operates from -52°C to +177°C (-62°F to +350°F).

Product Support and Availability

The 330101-00-08-05-02-00 is available from Petro Auto Tech. It is in stock and ready to ship. Contact Petro Auto Tech for current lifecycle status and ordering details.