330101-00-14-10-02-00 | Bently Nevada 3300 XL 8 mm Probe

Why Choose the 330101-00-14-10-02-00 for Vibration Monitoring?

When machinery vibration threatens uptime, the 330101-00-14-10-02-00 from Bently Nevada provides the precise measurement you need. This 3300 XL 8 mm probe is engineered for robustness and accuracy, making it a dependable choice for industrial rotating equipment.

With a total length of 1.0 metre (3.3 feet) and a miniature coaxial ClickLoc connector, this probe integrates easily into existing monitoring systems. The 3/8-24 UNF thread ensures secure mounting, while the unthreaded length of 0.0 inches and overall case length of 1.4 inches offer a compact footprint.

Key Features and Technical Specifications

• Probe Type: 3300 XL 8 mm probe with 3/8-24 UNF thread, without armor.
• Total Length: 1.0 metre (3.3 feet) – suitable for standard installations.
• Connector: Miniature coaxial ClickLoc connector with standard cable.
• Linear Range: 2 mm (80 mils), starting at approximately 0.25 mm (10 mils) from target.
• Incremental Scale Factor (ISF): 7.87 V/mm (200 mV/mil) ±5% for standard 5 or 1 meter systems.
• Deviation from Best Fit Straight Line (DSL): Less than ±0.025 mm (±1 mil) for standard systems.
• Probe Tip Material: Polyphenylene sulfide (PPS) for durability.
• Probe Case Material: AISI 303 or 304 stainless steel (SST).
• Temperature Range: -52°C to +177°C (-62°F to +350°F) for standard probe.

These specifications ensure accurate vibration measurement, even in demanding environments. The patented TipLoc molding method provides a robust bond between probe tip and body, enhancing reliability.

Real-World Applications

In petrochemical plants, power generation facilities, and manufacturing lines, the 330101-00-14-10-02-00 excels at monitoring shaft vibration and radial position. Its robust design minimizes downtime, which is critical for continuous processes. For example, in a turbine application, this probe helps detect early signs of imbalance, allowing maintenance teams to act before failure occurs.

Additionally, the probe's compatibility with standard field wiring (0.2 to 1.5 mm²) and maximum cable length of 305 meters (1,000 feet) makes it versatile for various plant layouts.

Installation and Setup

When installing the 330101-00-14-10-02-00, ensure the target surface is clean and the gap is set to the recommended -9 Vdc (approximately 1.27 mm or 50 mils) for radial vibration measurements. Use the 3/8-24 UNF thread for secure mounting, and connect the miniature coaxial ClickLoc connector to the extension cable. For optimal performance, route the cable away from high-temperature sources and avoid sharp bends.

Maintenance and Reliability

Regular inspection of the probe and cable is essential to maintain accuracy. Check for physical damage, such as cracks in the PPS tip or corrosion on the stainless steel case. The probe is designed to withstand harsh conditions, but periodic verification of the scale factor ensures consistent readings. Following the manufacturer's guidelines for cleaning and handling will extend service life.

Compatibility and Integration

The 330101-00-14-10-02-00 works seamlessly with Bently Nevada 3300 XL extension cables and Proximitor sensors. Its standard cable and ClickLoc connector simplify integration into existing monitoring systems. The probe's output (approximately -1 to -17 Vdc over the linear range) is compatible with most industrial vibration monitors.

Troubleshooting Common Issues

If readings appear erratic, first verify the gap setting and cable connections. A loose ClickLoc connector can cause intermittent signals. Also, ensure the probe tip is not contaminated with oil or debris, which can affect the scale factor. If the issue persists, consult the official Bently Nevada documentation or contact Petro Auto Tech for technical support.

Frequently Asked Questions

What is the linear range of the 330101-00-14-10-02-00?

The linear range is 2 mm (80 mils), starting at approximately 0.25 mm (10 mils) from the target, extending to 2.3 mm (90 mils).

What is the recommended gap setting for radial vibration?

The recommended gap setting is -9 Vdc, which corresponds to approximately 1.27 mm (50 mils).

What is the temperature range for this probe?

The standard probe operates from -52°C to +177°C (-62°F to +350°F).

Can this probe be used with existing Bently Nevada systems?

Yes, it is designed for use with 3300 XL extension cables and Proximitor sensors, ensuring easy integration.

Product Support and Availability

The 330101-00-14-10-02-00 is available through Petro Auto Tech, a trusted industrial automation parts supplier. We maintain stock to ensure prompt delivery. For lifecycle status and availability, please verify with our team before ordering.