Product Summary
The 1784-PCIDS DeviceNet PCI scanner card connects your host computer directly to a DeviceNet network. This module provides explicit messaging and I/O scan capabilities for critical automation tasks. You can use it for monitoring and configuration of networked devices. This Rockwell Automation card fits a standard PCI 2.1 slot.
Expert Procurement Guide for the 1784-PCIDS
The 1784-PCIDS requires a PC with an available PCI rev. 2.1 slot. Your computer must provide 5 Volts DC and 625 milliamps from the bus. The module also needs +24VDC @ 90 mA from the DeviceNet network. This card uses a PCI 5V, 32-bit short card form factor. You must verify your chassis has enough physical clearance.
Procurement managers must check the series compatibility for their software. Series A supports I/O Linx and RSNetworx for DeviceNet. Series B works with RSLinx and RSNetworx for DeviceNet. Each unit requires 2 MB of free disk space for its drivers. The open enclosure demands proper handling during installation and storage.
Step-by-Step Installation Guide for the 1784-PCIDS
Install this card only on a properly grounded and static-safe table. Touching only the card's corners prevents damage from static discharge. Always wear an anti-static wrist strap during the entire process. Remove the card from its anti-static bag only when ready. Insert the card firmly into the correct PCI slot.
The card has three built-in status indicators for real-time diagnostics. Monitor the Module, Network, and I/O status LEDs during startup. These lights help you verify successful communication with the DeviceNet network. The module holds 2048 bytes for both input and output image tables. This capacity allows for substantial data exchange with connected devices.
Logistics & Standard Packaging Details
Express delivery is available via FedEx, UPS, and DHL for fast shipping.
