The Flexem FC5M-20MN-AC is a compact and powerful programmable logic controller. It delivers precise control for demanding industrial applications. This unit integrates a 220VAC power supply with 12 discrete inputs. You get eight NPN transistor outputs for direct actuator control. The controller supports high-speed pulse operations for motion tasks. It uses an object-oriented programming concept for efficiency. This model provides an extremely cost-effective automation solution.
Product Procurement & Buyer Guide
The FC5M-20MN-AC uses a 220VAC rated power supply for global compatibility. This PLC operates reliably within a voltage range of 240V AC. It provides a total of 20 built-in I/O points for small machines. You get exactly 12 discrete input channels for sensor signals. Seven of these inputs function as high-speed counters at 100KHz. The unit offers 8 NPN transistor outputs for controlling loads. Six of these outputs support high-speed pulse trains at 200KHz. This configuration suits precise positioning and speed control applications.
The FC5M-20MN-AC features a detachable terminal block for easy wiring. It mounts directly onto a standard DIN rail for rapid installation. The plastic housing provides an IP20 protection rating for cabinet use. It operates effectively within an ambient temperature range of -10°C to 60°C. The controller includes a built-in RTC for time-stamping events. It supports one expansion board for adding specialized functions. You can connect up to 31 I/O expansion modules for system growth. This scalability makes it a future-proof choice for evolving production lines.
Step-by-Step User & Installation Guide
Begin by mounting the FC5M-20MN-AC onto a grounded DIN rail. Ensure the surrounding environment meets the specified pollution degree 2 standard. Connect the 220VAC power supply to the designated L and N terminals. Verify the input voltage stays within the 240V AC maximum limit. Use a 24V DC external power supply for the sensor inputs. Wire your NPN sensors to the discrete input terminals accordingly.
Connect your actuators to the eight NPN transistor output points. Ensure the load current does not exceed 2A per single point. The total current per common group must stay below 4A. For high-speed outputs, use a shielded cable that is 5m or shorter. Connect the standard outputs with non-shielded cable up to 50m long. Use the USB Type-C port for initial program download and commissioning.
Configure the RS485 serial port for communication with drives or HMIs. The built-in Ethernet port supports 10/100M data exchange. Use the Flexem software to program using Ladder Diagram or ST languages. The graphical interface simplifies the configuration of complex logic. This PLC supports program downloads without needing to disconnect power. This feature significantly reduces commissioning time on the factory floor.
Logistics & Standard Packaging Details
