22F-RF9P5-AL Allen-Bradley EMC Filter for PowerFlex 4M

Product Overview

The 22-RF9P5-AL is an EMC filter from Allen-Bradley. It reduces electromagnetic interference in drive systems. This L-type filter works with 240V AC power. It supports 3 phase motors from 0.2 to 1.5 kW. This unit is built for panel mounting. It has an IP20 rating. The filter is open type per UL NEMA standards. Use it with PowerFlex 4M drives for cleaner power.

This filter helps meet EMC compliance. It is a key part for many industrial setups. The 22-RF9P5-AL ensures stable drive operation. It reduces noise on the power line. This leads to longer equipment life. The filter is compact and easy to install.

Application Scenarios

Use this filter in factory automation. It works well for conveyor systems. It is ideal for pump and fan controls. The filter supports packaging machines. It is good for material handling. Use it in any 240V AC drive application. The filter fits in control cabinets. It works with PowerFlex 4M drives. This unit is for indoor use only. It is suitable for light industrial tasks.

Install it near the drive input. This maximizes noise reduction. The filter is for 50 or 60 Hz systems. It handles 0.25 to 2 HP motors. This makes it versatile for many machines. Use it to protect sensitive electronics. The filter reduces radiated and conducted emissions.

Technical Specifications

Type: L-type EMC filter. Voltage: 240V AC. Phase: 3 phase. Frequency: 50/60 Hz. Power range: 0.2 to 1.5 kW. Horsepower: 0.25 to 2 HP. Mounting: Panel mount. Enclosure: IP20. UL NEMA type: Open. Compatibility: PowerFlex 4M drives. The 22-RF9P5-AL is a standard filter for these drives.

It reduces electrical noise. It helps pass EMC tests. The filter has a compact design. It weighs only 0.5 kg. The unit is easy to wire. It requires a ground connection. Follow the manual for proper use. This filter is a reliable component. It is built for long service life.

Installation & Maintenance Guide

Mount the filter on a flat panel. Use the provided mounting holes. Connect the input power to the line side. Connect the drive to the load side. Ensure a solid ground connection. Keep the filter close to the drive. Use short cables for best results. Do not expose the filter to moisture. Keep the area clean and dry.

Check the connections yearly. Look for loose wires or damage. Replace the filter if it fails. No regular maintenance is needed. The filter is a passive device. It does not require software setup. Follow all local electrical codes. Use proper wire sizes. Install a fuse or breaker upstream.

Packing List

1 x Allen-Bradley EMC filter 22-RF9P5-AL. 1 x installation manual. Mounting hardware is included. The unit is in a protective box. Shipping via Fedex, UPS, or DHL. This is a new, original product. Check for any damage upon receipt. Keep the packaging for returns.