Flexem FR-D0016P 16-Channel PNP Digital Output Module, 1A

June 11, 2026 • 2 min read • wayne • Guide

Product Summary

The Flexem FR-D0016P delivers precise control for demanding automation tasks. This module drives 16 PNP outputs with a robust 1000mA per channel. Its compact 18mm width saves valuable cabinet space. Engineers trust this unit for reliable signal switching in industrial environments.

Expert Technical Evaluation & Performance Review

The FR-D0016P provides a high-density output solution with exceptional current handling. Each of its 16 channels supports a maximum of 1000mA individually. For sustained operation, the module limits simultaneous output to 500mA per channel. This design prevents thermal overload during continuous use.

Every channel features a clear LED indicator for instant status verification. This visual feedback simplifies troubleshooting during system startup. The module operates on a standard 35mm DIN rail for rapid installation. Its lightweight 65g design reduces mechanical stress on the mounting rail.

The PNP (sourcing) output configuration matches common industrial PLC standards. This compatibility ensures seamless integration into existing control architectures. The module’s compact dimensions of 111mm x 18mm x 76mm optimize panel layout. Engineers can place multiple units side-by-side for dense I/O arrays.

Step-by-Step Installation Guide

Mount the FR-D0016P onto a standard 35mm DIN rail for secure placement. Push the module firmly until the locking clip engages. Ensure adequate airflow around the unit for passive cooling. Connect your 24V DC power supply to the module’s bus connector.

Wire each output channel to your load device using appropriate gauge cable. Verify the load current does not exceed the 1000mA single-channel limit. Activate the system and check each channel’s LED indicator for proper function. The PNP output provides a positive switched signal to your actuator.